Center Bearings
Filters: CENTERLINE TO BASE = 0.000, | PART NUMBER | BEARING ID | CENTER TO CENTER OF MOUNT HOLES | BRACKET WIDTH | C/L TO BASE | APPLICATION | NOTES | VEHICLE CLASS | BRAND |
|---|---|---|---|---|---|---|---|---|
63006RS |
1.181 | 0.000 | 0.000 | 0.000 | Ball Bearing, 30 mm Bore ID, 55 mm OD, 19 mm Width | LD | PTI | |
| 3R80-35 |
1.574 | 0.000 | 0.000 | 0.000 | Buick | Buick, Bearing not included | LD | PTI |
| 3680-13 |
1.181 | 5.875 | 1.250 | 0.000 | Cadillac CT6 | bearing centerline zero | LD | PTI |
| 1680-30 |
1.181 | 6.375 | 2.170 | 0.000 | Dodge D50 (79-80) | Inner bearing width .950 | LD | PTI |
| 1680-35 |
1.181 | 7.500 | 2.050 | 0.000 | Dodge. Jeep | CL to base mounting points offset 1.00" and 4.00" . Grommets included | LD | PTI |
| 2480-30 |
1.181 | 6.250 | 2.000 | 0.000 | Lexus | Lexus GS300 (98-01) GS400 (98-01) LS430 (01-03) | LD | PTI |
| 2480-40 |
1.181 | 5.750 | 1.810 | 0.000 | Lexus | Lexus IS300 (01-03) LS400 (95-00) | LD | PTI |
| 2680-55 |
1.102 | 7.375 | 2.370 | 0.000 | Mazda | CB mounts at an offset . one bracket sits below 2.25" and the opposite side mounts 1.25" below | LD | PTI |
| 2880-50 |
0.000 | 0.000 | 0.000 | 0.000 | Mercedes | 6006LLU must be placed with housing and rubber inside white box. Housing ONLY part # "1084130112" |
LD | PTI |
| 2880-51 |
0.000 | 0.000 | 0.000 | 0.000 | Mercedes | 6006LLU must be placed with housing and rubber inside white box. Housing ONLY part # "1114130012" |
LD | PTI |
| 2880-90 |
0.985 | 4.625 | 1.430 | 0.000 | Mercedes | 6005LLU must be placed with housing and rubber inside white box | LD | PTI |
| 2880-25 |
1.181 | 4.900 | 1.630 | 0.000 | Mercedes | #3 Pad. 6006LLU must be placed with housing and rubber inside white box | LD | PTI |
| 2880-35 |
1.181 | 4.900 | 0.000 | 0.000 | Mercedes | #4 stamped into bracket | LD | PTI |
| 2880-65 |
1.181 | 4.900 | 1.620 | 0.000 | Mercedes | #2 Pad. 6006LLU must be placed with housing and rubber inside white box. Housing ONLY part # "1404100881" |
LD | PTI |
| 2880-75 |
1.181 | 4.950 | 0.000 | 0.000 | Mercedes | #6 Pad, 6006LLU must be placed with housing and rubber inside white box. Housing ONLY part # "1294102181" |
LD | PTI |
| 2880-15 |
1.181 | 4.900 | 1.620 | 0.000 | Mercedes 400SE, 400SEL, 500SEL, 500SL, S420, S500, SL500 | 6006LLU must be placed with housing and rubber inside white box. Housing ONLY part # "1404100781" | LD | PTI |
| 1480-80 |
1.181 | 0.000 | 0.000 | 0.000 | Merkur | Rubber and bearing only | LD | PTI |
| 1680-20 |
1.181 | 6.375 | 2.090 | 0.000 | Multiple | Mitsubishi Dodge | LD | PTI |
| 2480-50 |
1.181 | 6.875 | 2.125 | 0.000 | Multiple | Toyota Highlander (01-06) Lexus RX300/330 (99-06) | LD | PTI |
| 2480-60 |
1.181 | 7.000 | 2.125 | 0.000 | Multiple | Toyota Highlander (01-06) Lexus RX300/330 (99-06) | LD | PTI |
| 3R80-15 |
1.574 | 0.000 | 0.000 | 0.000 | Multiple | 40x62x15 Bearing only. Fits in housings of 3R80-10, 3R80-25, 3R80-30 and 3R80-35 | LD | PTI |
| 9980-15 |
1.181 | 0.000 | 2.400 | 0.000 | Multiple | Isuzu Honda, Rubber and bearing only | LD | PTI |
| 2380-35 |
1.181 | 7.250 | 2.060 | 0.000 | Multiple | Toyota Matrix/Pontiac Vibe 2003-2006 | LD | PTI |
| 2380-45 |
1.181 | 6.625 | 2.435 | 0.000 | Multiple | Toyota Matrix/Pontiac Vibe 2009-2013 | LD | PTI |
| 1280-60 |
1.181 | 0.000 | 0.000 | 0.000 | Nissan | Inner bearing width .866 / 610 (73-76) 810 (77-81) 200SX (77-83) | LD | PTI |
| 6006LLU |
1.181 | 0.000 | 0.000 | 0.000 | Numerous | Single Row Deep Groove Radial Ball Bearing, 30 mm Bore ID, 55 mm OD, 13 mm Width, Double Sealed | LD | PTI |
| 2580-68 |
1.181 | 6.625 | 0.000 | PORSCHE PANAMERA | LD | PTI | ||
| 9980-43 |
1.181 | 5.800 | 1.020 | 0.000 | Subaru | Mounting brackets are centered angled downward | LD | PTI |
| 2380-66 |
0.985 | 6.625 | 2.375 | 0.000 | Toyota | Toyota Rav4 2006-2011 | LD | PTI |
| 1380-30 |
1.181 | 6.000 | 2.170 | 0.000 | Toyota | Pickup 4X2 (84-95), M10-1.25 thread | LD | PTI |
| 1380-40 |
1.181 | 6.000 | 2.170 | 0.000 | Toyota | Pickup 4X4 (89-95) | LD | PTI |
| 1380-80 |
1.181 | 3.181 | 0.000 | 0.000 | Toyota | Pickup 4X2 (73-75) | LD | PTI |
| 2380-30 |
1.181 | 6.400 | 2.180 | 0.000 | Toyota | Cressida (78-5/85) | LD | PTI |
| 2380-40 |
1.181 | 6.375 | 2.170 | 0.000 | Toyota | Toyota Corolla (77-83) | LD | PTI |
| 2380-50 |
1.181 | 5.875 | 2.200 | 0.000 | Toyota | Celica (78-81) Corona (78-81) |
LD | PTI |
| 2380-65 |
1.181 | 7.000 | 2.340 | 0.000 | Toyota | Rav 4 AWD (01-05) | LD | PTI |
| 2380-80 |
1.181 | 5.875 | 2.400 | 0.000 | Toyota | Toyota Corolla AWD (89-92) Front on 3pc shaft | LD | PTI |
| 2380-90 |
1.181 | 5.875 | 2.300 | 0.000 | Toyota | Toyota Corolla AWD (89-92), Rear on 3pc shaft, CB mounts at an offset . one bracket even( 2.32" bracket ) and the opposite side mounts .50" below ( 2.30" bracket ) | LD | PTI |
| 2380-55 |
1.181 | 6.625 | 2.350 | 0.000 | Toyota | 88-93 Celica All Trac | LD | PTI |
| 1380-65 |
1.260 | 6.791 | 2.250 | 0.000 | Toyota Truck 16+ | LD | PTI |
